BUBBLE CPAP – NEOPLUS MEDICAL EQUIPMENTS

Alveo

SPECIFICATION

HD-PLUS

SPECIFICATIONS

System:

Microprocessor Controlled Servo
Heated Humidifier.
State-of-the-art Heated Wire
Technology for controlled
Humidification at Distal End.

Display: Digital Display of Gas Temperature at Distal End.

Control: Maintains Gas Temperature within ±0.3 C of set value.

Safety: High Temperature Cutoff, Overheat Protection.

Other Features: Reusable Heated Wire for Economy in Usage.

Easily Mountable, Side-on,

Transparent Autoclavable Water

Chamber for Passover Humidification.

Ease of compatibility with Most Ventilators and Anesthesia Machines.

Power: 230V A.C. 50Hz.

ACCESSORIES: Humidifier Chamber, Sensor wire, Mains Chord.

System:-

Two-in-one Valve based continuous flow
a) CPAP and IPPR
b) Bubbler based Bubble CPAP

Display:-

Digital and Analog Display of CPAP
pressure in CPAP Mode.
Continuous Digital display of Delivered
pressure in IPPR Mode

Alarms:-

CPAP High and Low Alarms
(Audio Visual)

Pressure Gauge:-

20 to 100 cmH₂O

Gas Mixing:-

Accurate Gas Blender from
21% to 100% FiO

Air Source:-

Inbuilt Air Compressor (20 to 60 PSI)

O2 Source :-

Inlet for Oxygen Gas (20 to 60PSI)

Power:-

230 V A.C. 50Hz

Accessories:-

HD-Plus Humidifier, Breathing Circuits
(Disposable), CPAP Interface,
Nasal Cannula, Dummy Test Lung.

Certification:-

IEC 60601
IEC 60601 – 1 – 8
IEC 60601 – 1 – 2
EMI – EMC

Tested as per following:-

As per CISPR 11:2019, IEC 61000-4-6:2013, IEC 61000-4-4:2012, IEC 61000-4-5:2017, IEC 61000-4-8:2009 & IEC 61000-4-2:2008
IEC 60601-1:2005+A1:2012+A2:2020
IEC 60601-1:2005+AMD1:2012+AMD2:2020
IEC 60601-1-8:2006+A1:2012+A2:2020
IEC61000-3-2 Edition 5.0 2020-07

ALVEO

Res-P

SPECIFICATION

HD-PLUS

SPECIFICATIONS

System:

Microprocessor Controlled Servo
Heated Humidifier.
State-of-the-art Heated Wire
Technology for controlled
Humidification at Distal End.

Display: Digital Display of Gas Temperature at Distal End.

Control: Maintains Gas Temperature within ±0.3 C of set value.

Safety: High Temperature Cutoff, Overheat Protection.

Other Features: Reusable Heated Wire for Economy in Usage.

Easily Mountable, Side-on,

Transparent Autoclavable Water

Chamber for Passover Humidification.

Ease of compatibility with Most Ventilators and Anesthesia Machines.

Power: 230V A.C. 50Hz.

ACCESSORIES: Humidifier Chamber, Sensor wire, Mains Chord.

System:-

Bubbler based Bubble CPAP

Gas Mixing

Accurate Gas Blender from
21% to 100% FiO2

Air Source

Inbuilt Air Compressor (20 to 60 PSI)

O2 Source

Inlet for Oxygen Gas (20 to 60 PSI)

Power

230V A.C. 50Hz.

Accessories

HD-Plus Humidifier, CPAP Interface,
Breathing Circuits (Disposable),
Nasal Cannula, Dummy Test Lung.

Certification:-

IEC 60601
IEC 60601 – 1 – 8
IEC 60601 – 1 – 2
EMI – EMC

Tested as per following:-

RES P

Res-P-Line

SPECIFICATION

HHD-01

SPECIFICATION

System: Microprocessor controlled heated humidifier.

Display: Digital display of set temperature and gas temperature in chamber.

Control: Maintains chamber gas temperature within ±0.3 C of set value.

Safety: High Temperature Cutoff, Overheat Protection.

Other Features: Easily mountable, slide-on, transparent, autoclavable water chamber for passover humidification. Ease of compatibility with most ventilators and anesthesia machines.

Power: 230V A.C. 50Hz.

System:-

Two-in-one Valve based continuous flow
a) CPAP and IPPR
b) Bubbler based Bubble CPAP

Display:-

Digital and Analog Display of CPAP
pressure in CPAP Mode.
Continuous Digital display of Delivered
pressure in IPPR Mode

Alarms:-

CPAP High and Low Alarms (Audio Visual)

Pressure Gauge:-

20 to 100 cmH₂O

Gas Mixing:-

Air and Oxygen Mixer using calibrated
Rotameters

Air Source:-

Inbuilt Air Compressor (20 to 60 PSI)

O2 Source :-

Inlet for Oxygen Gas (20 to 60PSI)

Power:-

230 V A.C. 50Hz

Accessories:-

HD-Plus Humidifier, Breathing Circuits
(Disposable), CPAP Interface,
Nasal Cannula, Dummy Test Lung.

Certification:-

IEC 60601
IEC 60601 – 1 – 8
IEC 60601 – 1 – 2
EMI – EMC

Tested as per following:-

RES P LINE

Inno Res

SPECIFICATION

HHD-01

SPECIFICATION

System: Microprocessor controlled heated humidifier.

Display: Digital display of set temperature and gas temperature in chamber.

Control: Maintains chamber gas temperature within ±0.3 C of set value.

Safety: High Temperature Cutoff, Overheat Protection.

Other Features: Easily mountable, slide-on, transparent, autoclavable water chamber for passover humidification. Ease of compatibility with most ventilators and anesthesia machines.

Power: 230V A.C. 50Hz.

System:-

Bubbler based Bubble CPAP

Gas Mixing:-

Air and Oxygen Mixer using calibrated
Rotameters

Air Source:-

Inbuilt Air Compressor (20 to 60 PSI)

O2 Source :-

Inlet for Oxygen Gas (20 to 60 PSI)

Power:-

230 V A.C. 50Hz

Accessories:-

HHD-01 Humidifier, CPAP Interface,
breathing circuits (Disposable),
Nasal Cannula, dummy test Lung.

Certification:-

IEC 60601
IEC 60601 – 1 – 8
IEC 60601 – 1 – 2
EMI – EMC

Tested as per following:-

INNO RES

Neo Res

SPECIFICATION

HHD-01

SPECIFICATION

System: Microprocessor controlled heated humidifier.

Display: Digital display of set temperature and gas temperature in chamber.

Control: Maintains chamber gas temperature within ±0.3 C of set value.

Safety: High Temperature Cutoff, Overheat Protection.

Other Features: Easily mountable, slide-on, transparent, autoclavable water chamber for passover humidification. ease of compatibility with most ventilators and anesthesia machines.

Power: 230V A.C. 50Hz.

System:-

Two-in-one Valve based continuous flow
a) CPAP and IPPR
b) Bubbler based Bubble CPAP

Display:-

Analog Display of Delivered pressure.

Pressure Gauge:-

20 to 100 cmH₂O

Gas Mixing:-

Air and Oxygen Mixer using calibrated
Rotameters.

Air Source:-

Inbuilt Air Compressor (20 to 60 PSI)

O2 Source :-

Inlet for Oxygen Gas (20 to 60 PSI)

Power:-

230V A.C. 50 Hz.

Accessories:-

HD-Plus Humidifier, Breathing Circuits
(Disposable), CPAP Interface,
Nasal Cannula, Dummy Test Lung.

Certification:-

IEC 60601
IEC 60601 – 1 – 8
IEC 60601 – 1 – 2
EMI – EMC

Tested as per following:-

NEO RES

ALVEO PLUS

SPECIFICATION

System:-

Two-in-one Valve based continuous flow
a) CPAP and IPPR
b) Bubbler based Bubble CPAP

Display:-

Continuous Digital display with wave
form and seven segment display of
Delivered pressure in Conventional,
IPPR and Bubble CPAP Mode

Alarms:-

CPAP High and Low Alarms
(Audio Visual)

Gas Mixing:-

Accurate Gas Blender from
21% to 100% FiO

Air Source:-

Inbuilt Air Compressor (20 to 60 PSI)

O2 Source :-

Inlet for Oxygen Gas (20 to 60 PSI)

Power:-

230V A.C. 50 Hz.

Accessories:-

HD-Plus Humidifier, Breathing Circuits
(Disposable), CPAP Interface,
Nasal Prongs, Dummy Test Lung.

Certification:-

IEC 60601
IEC 60601 – 1 – 8
IEC 60601 – 1 – 2
EMI – EMC

Tested as per following:-

ALVEO PLUS

Alveo

SPECIFICATION

HD-PLUS

SPECIFICATIONS

System:

Microprocessor Controlled Servo
Heated Humidifier.
State-of-the-art Heated Wire
Technology for controlled
Humidification at Distal End.

Display: Digital Display of Gas Temperature at Distal End.

Control: Maintains Gas Temperature within ±0.3 C of set value.

Safety: High Temperature Cutoff, Overheat Protection.

Other Features: Reusable Heated Wire for Economy in Usage.

Easily Mountable, Side-on,

Transparent Autoclavable Water

Chamber for Passover Humidification.

Ease of compatibility with Most Ventilators and Anesthesia Machines.

Power: 230V A.C. 50Hz.

ACCESSORIES: Humidifier Chamber, Sensor wire, Mains Chord.

System:-

Two-in-one Valve based continuous flow
a) CPAP and IPPR
b) Bubbler based Bubble CPAP

Display:-

Digital and Analog Display of CPAP
pressure in CPAP Mode.
Continuous Digital display of Delivered
pressure in IPPR Mode

Alarms:-

CPAP High and Low Alarms
(Audio Visual)

Pressure Gauge:-

20 to 100 cmH₂O

Gas Mixing:-

Accurate Gas Blender from
21% to 100% FiO

Air Source:-

Inbuilt Air Compressor (20 to 60 PSI)

O2 Source :-

Inlet for Oxygen Gas (20 to 60PSI)

Power:-

230 V A.C. 50Hz

Accessories:-

HD-Plus Humidifier, Breathing Circuits
(Disposable), CPAP Interface,
Nasal Cannula, Dummy Test Lung.

Certification:-

IEC 60601
IEC 60601 – 1 – 8
IEC 60601 – 1 – 2
EMI – EMC

Tested as per following:-

ALVEO

Res-P

SPECIFICATION

HD-PLUS

SPECIFICATIONS

System:

Microprocessor Controlled Servo
Heated Humidifier.
State-of-the-art Heated Wire
Technology for controlled
Humidification at Distal End.

Display: Digital Display of Gas Temperature at Distal End.

Control: Maintains Gas Temperature within ±0.3 C of set value.

Safety: High Temperature Cutoff, Overheat Protection.

Other Features: Reusable Heated Wire for Economy in Usage.

Easily Mountable, Side-on,

Transparent Autoclavable Water

Chamber for Passover Humidification.

Ease of compatibility with Most Ventilators and Anesthesia Machines.

Power: 230V A.C. 50Hz.

ACCESSORIES: Humidifier Chamber, Sensor wire, Mains Chord.

System:-

Bubbler based Bubble CPAP

Gas Mixing

Accurate Gas Blender from
21% to 100% FiO2

Air Source

Inbuilt Air Compressor (20 to 60 PSI)

O2 Source

Inlet for Oxygen Gas (20 to 60 PSI)

Power

230V A.C. 50Hz.

Accessories

HD-Plus Humidifier, CPAP Interface,
Breathing Circuits (Disposable),
Nasal Cannula, Dummy Test Lung.

Certification:-

IEC 60601
IEC 60601 – 1 – 8
IEC 60601 – 1 – 2
EMI – EMC

Tested as per following:-

RES P

Res-P-Line

SPECIFICATION

HHD-01

SPECIFICATION

System: Microprocessor controlled heated humidifier.

Display: Digital display of set temperature and gas temperature in chamber.

Control: Maintains chamber gas temperature within ±0.3 C of set value.

Safety: High Temperature Cutoff, Overheat Protection.

Other Features: Easily mountable, slide-on, transparent, autoclavable water chamber for passover humidification. Ease of compatibility with most ventilators and anesthesia machines.

Power: 230V A.C. 50Hz.

System:-

Two-in-one Valve based continuous flow
a) CPAP and IPPR
b) Bubbler based Bubble CPAP

Display:-

Digital and Analog Display of CPAP
pressure in CPAP Mode.
Continuous Digital display of Delivered
pressure in IPPR Mode

Alarms:-

CPAP High and Low Alarms (Audio Visual)

Pressure Gauge:-

20 to 100 cmH₂O

Gas Mixing:-

Air and Oxygen Mixer using calibrated
Rotameters

Air Source:-

Inbuilt Air Compressor (20 to 60 PSI)

O2 Source :-

Inlet for Oxygen Gas (20 to 60PSI)

Power:-

230 V A.C. 50Hz

Accessories:-

HD-Plus Humidifier, Breathing Circuits
(Disposable), CPAP Interface,
Nasal Cannula, Dummy Test Lung.

Certification:-

IEC 60601
IEC 60601 – 1 – 8
IEC 60601 – 1 – 2
EMI – EMC

Tested as per following:-

RES P LINE

Inno Res

SPECIFICATION

HHD-01

SPECIFICATION

System: Microprocessor controlled heated humidifier.

Display: Digital display of set temperature and gas temperature in chamber.

Control: Maintains chamber gas temperature within ±0.3 C of set value.

Safety: High Temperature Cutoff, Overheat Protection.

Other Features: Easily mountable, slide-on, transparent, autoclavable water chamber for passover humidification. Ease of compatibility with most ventilators and anesthesia machines.

Power: 230V A.C. 50Hz.

System:-

Bubbler based Bubble CPAP

Gas Mixing:-

Air and Oxygen Mixer using calibrated
Rotameters

Air Source:-

Inbuilt Air Compressor (20 to 60 PSI)

O2 Source :-

Inlet for Oxygen Gas (20 to 60 PSI)

Power:-

230 V A.C. 50Hz

Accessories:-

HHD-01 Humidifier, CPAP Interface,
breathing circuits (Disposable),
Nasal Cannula, dummy test Lung.

Certification:-

IEC 60601
IEC 60601 – 1 – 8
IEC 60601 – 1 – 2
EMI – EMC

Tested as per following:-

INNO RES

Neo Res

SPECIFICATION

HHD-01

SPECIFICATION

System: Microprocessor controlled heated humidifier.

Display: Digital display of set temperature and gas temperature in chamber.

Control: Maintains chamber gas temperature within ±0.3 C of set value.

Safety: High Temperature Cutoff, Overheat Protection.

Other Features: Easily mountable, slide-on, transparent, autoclavable water chamber for passover humidification. ease of compatibility with most ventilators and anesthesia machines.

Power: 230V A.C. 50Hz.

System:-

Two-in-one Valve based continuous flow
a) CPAP and IPPR
b) Bubbler based Bubble CPAP

Display:-

Analog Display of Delivered pressure.

Pressure Gauge:-

20 to 100 cmH₂O

Gas Mixing:-

Air and Oxygen Mixer using calibrated
Rotameters.

Air Source:-

Inbuilt Air Compressor (20 to 60 PSI)

O2 Source :-

Inlet for Oxygen Gas (20 to 60 PSI)

Power:-

230V A.C. 50 Hz.

Accessories:-

HD-Plus Humidifier, Breathing Circuits
(Disposable), CPAP Interface,
Nasal Cannula, Dummy Test Lung.

Certification:-

IEC 60601
IEC 60601 – 1 – 8
IEC 60601 – 1 – 2
EMI – EMC

Tested as per following:-

NEO RES

ALVEO PLUS

SPECIFICATION

System:-

Two-in-one Valve based continuous flow
a) CPAP and IPPR
b) Bubbler based Bubble CPAP

Display:-

Continuous Digital display with wave
form and seven segment display of
Delivered pressure in Conventional,
IPPR and Bubble CPAP Mode

Alarms:-

CPAP High and Low Alarms
(Audio Visual)

Gas Mixing:-

Accurate Gas Blender from
21% to 100% FiO

Air Source:-

Inbuilt Air Compressor (20 to 60 PSI)

O2 Source :-

Inlet for Oxygen Gas (20 to 60 PSI)

Power:-

230V A.C. 50 Hz.

Accessories:-

HD-Plus Humidifier, Breathing Circuits
(Disposable), CPAP Interface,
Nasal Prongs, Dummy Test Lung.

Certification:-

IEC 60601
IEC 60601 – 1 – 8
IEC 60601 – 1 – 2
EMI – EMC